The biggest questions on intermodal tend to be around damage and understanding the differences between intermodal and truckload shipping.
Even though intermodal damage is averages only 0.2% of all delivered loads, as is stated on the Union Pacific website, it is important to discuss what is causing the damage so your company is not part of the statistic.
And the way not to be one of the statistics is to learn about harmonic vibration that occurs with intermodal shipments.
Definition of Harmonic Vibration
The dictionary.com definition of harmonic vibration is periodic motion consisting of one or more vibratory motions that are symmetric about a region of equilibrium.
Since the majority of logistics professionals are not physics majors, let’s put harmonic vibration in terms easier understood by walking through how harmonic vibration impacts intermodal shipments and what can be done to mitigate its impact.
To begin with harmonic vibration is associated with intermodal and not over-the-road truckload shipments because the vibration comes from the long haul train segment of the shipment. This one difference is what causes the majority of problems shippers have with damage on intermodal shipments, with the second being that of weight, which you will soon find out has a lot to do with harmonic vibration.
Every rail shipment is subject to harmonic vibration. The vibration is a slow steady vibration that causes the pallets to float at one speed. Each load speeds floats at different harmonic vibration because the density of shipments vary, based on the product being shipped.
So, as a train travels on the rail for an extended period at the critical speed for a particular load, the product will move laterally and longitudinally in the intermodal container because of harmonic vibration.
The pallets stacked with product will not only move on the decking of the container, but the pallet stack has the potential to fall apart if the product is not tightly wrapped or banded to its pallet.
As we often describe it to those new to intermodal shipping, think of harmonic vibration in terms of the old football vibration kids game where each player would line up their football player pieces on a metal board.
Once the football players were set (pallets loaded onto an intermodal container), the kids would turn the board on (container is loaded onto an intermodal well-car) and it would be a gentle vibration that caused the players to move on the field ( traveling on the rail system).
So, for those that were not familiar with the game and watched the 30 second video above found the vibration was gentle and consistent, like the vibration an intermodal container experiences on the rail tracks.
Mitigating Harmonic Vibration in Intermodal Shipments
Harmonic vibration is not jarring to a shipment, as can happen to a truckload trailer traveling over a rough road, but the slow and steady vibration can cause damage if the load is not properly blocked and braced in the container to account for the harmonic vibration.
The damage can come from the pallets of product shifting on the floor of the container and rubbing against themselves and / or the vibrations cause a poorly stretch-wrapped pallet to fall and cause the product to fall.
A side effect of the pallets shifting is the container will be overweight. While the overweight situation will not be in total, the pallets shifting can cause the intermodal container to be overweight on an axle, as is described below in in the diagram.
- Steer axle: 12,000 pounds or 6,000 pounds per tire
- Drive axle tandems: 34,000 pounds or 4,250 pounds per tire
- Trailer tandems: 34,000 pounds or 4,250 pounds per tire.
This shifting of weight is a frustration to shippers new to intermodal when they find their shipment was legal at origin, but becomes illegal at destination.
Blocking and bracing can be done through a number of techniques to mitigate the effects of harmonic vibration by holding the contents of the shipment in place from origin to destination.
While distribution center and warehouse operation groups tense up when they hear they have to block and brace for intermodal loads, quite often it only takes a couple of 2×4’s secured with some 16d nails.
So, for a little extra effort and materials at the time of loading your company can significantly save on its shipping expense and increase its capacity options with intermodal.
Additional Articles on Intermodal Transportation:
- The Complete Guide to Intermodal Transportation
- Intermodal Weight – The Most Common Issue for Shippers
- Comparing Truckload vs Intermodal: 11 Differences Shippers Should Know
- Pros & Cons of Using Intermodal for Your Company’s Shipments
- Asset vs Non-Asset Intermodal Freight Providers: A Detailed Comparison
- JB Hunt’s Intermodal Model vs Class I Railroads: Pros and Cons of Each
Hopefully you found the above information to be helpful and if ever you are looking at alternatives to your shipping needs we here at CSX crew would like to be a part of that conversation.
Learn more about CSX crew Freight & Logistics and follow us on our weekly blogs.